Step 1: Check Fabrics and Prepare the Area
Check the manufacturers tag for cleaning instructions. If there is a W or W/S on the tag it means you can use water for cleaning and you can clean it with a spot cleaner. If it is coded S or X or says “Dry Clean Only”, do not use the spot cleaner and contact the manufacturer for cleaning instructions.
Always test the cleaning solution and spot cleaner in an inconspicuous spot or hidden area and allow it to dry before proceeding. If upholstery color is affected, do not use the spot cleaner.
Thoroughly vacuum the upholstery, stairs, rug or area before you begin using the spot cleaner.
Step 2: Prepare The Spot Cleaner Rental Machine
Remove the Clean Water Tank from the machine by lifting the smaller handle. Unscrew the black cap on the bottom and fill tank with hot tap water to the water fill line. Add 1/4 cup (2 oz) of Rug Doctor® or BISSELL® cleaning formula. Replace the black cap, tighten and place the tank back on the machine.
Release the hand tool and hose by twisting the latch. Twist the Quick Release™ Cord Wrap and unwind the cord. Plug into outlet and press the red power button to turn on.
Step 3: Deep Clean Your Upholstery or Carpet
Hold the tool approximately 1 inch above the area you are cleaning and press the spray trigger to dispense water and cleaning solution. Release the spray trigger and use bristles to scrub the area. Apply downward pressure and move the tool slowly towards you to suction the dirty water. Continue until no more dirt can be removed.
When the dirty water reaches the “FULL” line in the Dirty Water Tank, it’s time to empty it. Remove the tank and carry to disposal area. Unlock the lid by rotating the handle up and over the back of the tank. Remove the lid and pour out the dirty water. Rinse out tank to remove any debris. Replace the tank lid and rotate the handle forward to lock back into place. Before placing tank back into the machine, remove any debris from the red filter area.