Rug Doctor Click to view our accessibility policy

No products in the cart.

Pro-Deep Carpet Cleaner

Rug Doctor’s Pro-Deep Carpet Cleaner removes over 90% of ground-in dirt, grime and oils embedded in carpet. This carpet extractor’s professional grade motor, penetrating brushes and suction power deeply scrubs dirt, grime and other tough stains from high traffic carpeted areas while deodorizing and freshening home and office spaces. The Pro-Deep Carpet Cleaner is made from sturdy, high impact materials and features one click, easy-lift clean and dirty water tanks, making filling and emptying easier.

No assembly required.

Your Rug Doctor Pro-Deep Carpet Cleaner is ready to use right out of the box.

Fill the Tank

Unscrew the Easy Measure Solution Pour Cap from the Clean Water Tank. Fill the Clean Water Tank with HOT tap water until it reaches the fill line.

Follow the directions on the back of the Rug Doctor cleaning solution and fill the Easy Measure Solution Pour Cap with the recommended ounces of solution. Clean Water Tank holds 1.5 gallons of water. Tightly screw the Easy Measure Solution Pour Cap onto the tank.

Securely place the full Clean Water Tank back onto the machine. You will hear a click sound when the tank has locked into place. Then insert plug into a properly grounded outlet, and you’re ready to begin.

Prepping Your Pro-Deep Carpet Cleaner

Firmly pull back the Main Handle to release the handle into the cleaning position. Press the red Power Button located on the Main Handle to Carpet position. Press the Soap & Scrub Solution Button to apply solution while making 2 slow wet passes (1 forward and 1 backward) over each area. Release the Soap & Scrub Button. Make 2 slow dry passes (1 forward and 1 backward) to suck up the dirty solution (do not hold down the Soap & Scrub Solution Button for this step).

For more information about how to properly use this Rug Doctor machine, download the User Guide by clicking the link below.